It is a professional tool for commercial or DIY use. The kit is ideal assistance for you to remove and install ball joints, bushes and bearings for numerous BMW models from 1 Series to 8 Series.
 
This silent bearings tool set is designed for long life in daily workshop use and categorized into industrial grade. All tools are sorted in a blow molded case for easy storage and transportation.

Silent bearing tool set for BMW, 16 pcs as below

A feed rod:
Length: 8.9"
Thread size: M12 x 0.1"
Hex drive wrench length: 0.3"
Used for actuating the Silent bearing
A spindle nut:
Thread size: M12 x 0.1"
Hexagonal drive wrench length: 0.7"
A compression nut(with axial groove bearing):
Internal thread size: M12 x 0.1"
Hexagonal drive wrench length: 0.9"
A support sleeve(side slits):
Outer diameter: 2.8"
Inner diameter 2.3"
A support plate:
Hole diameter: 0.5"
Outer diameter 2.8"
Trimmed with outer diameter: 2.2"
Height 0.5"
A pull-out pressure sleeve:
Internal thread zies: M12 x 0.1"
outer diameter: 2"
Inner diameter 2"
Height: 1.4"
An intake pressure sleeve:
 Internal thread size: M12 x 0.1"
Outer diameter: 2.3"
Inner diameter: 1.9"
Height: 1.7"
A pull-out spacer sleeve:
 Bore diameter: 0.5"
Outer diameter: 2.2"
Inner diameter: 1.8"
Height: 2.8"
A pull sleeve:
Hole diameter: 0.5"
Outer diameter: 1.8"
Inner diameter 1.4"
Height: 1.2"
An intake spacer sleeve:
Internal thread size: M12 x 0.1"
Outer diameter: 2.2"
Inner diameter: 1.8"
Height: 1.2"
With lateral phase
A spacer sleeve:
Hole diameter: 0.5"
Outer diameter: 2.3"
Inner diameter 1.9"
Height: 2.4"
A pressure element:
Internal thread size: M12 x 0.1"
Outer diameter: 2"
Iinner diameter: 1.3"
Height: 1"
A sleeve:
Bore diameter: 0.5"
Outer diameter: 2.6"
Inner diameter 2"
Height: 2.8"
A pull-out pressure piece:
Internal thread size: M12 x 0.1"
Outer diameter: 1.9"
Inner diameter: 1.3"
Height: 0.8"
An intake pressure piece:
Internal thread size: M12 x 0.1"
Outer diameter: 2.6"
Inner diameter: 1.3"
Height: 0.8"
A draw- plate:
Hole diameter: 0.5"
Outer diameter: 2"
Trimmed with outer diameter: 1.8"
Height:0.5"
A molded case, various print pieces, stem and pods are included
Allows the renewing of rubber bushings the suspension
Suitable for vehicles from BMW, 1 Series models (e.g. E81 , E87; 3 Series E36, E46, E83, E90, E91, E92, E93; 5 Series models E60, E61, E63; 6 Series models , E64 , E38; 7 Series models, E65, E66, E67; 8 Series models E31, E85 Z4 models, E86, and Mini Cooper S R53 model)